Chapter 15, Section 13

The Night the Studio Emptied: How AM Radio Learned to Run Itself

Part of AM Radio Facts and Trivia: The AM Broadcast Band in the USA. Updated November 15, 2026.

For the first three decades of broadcasting, a station could not legally stay on the air without a licensed engineer sitting at the transmitter, watching the meters, every minute it was running (see The First Phone and The Operator on Duty). That single rule shaped the economics of the entire industry, and the first crack in it appeared, of all places, in Bakersfield. In 1956 a station called KGEE became the first in the country to automate, handing its overnight hours to a machine so it could stay on the air all night without paying anyone to be there.

The machine was the work of Paul Schafer, remembered ever since as the father of radio automation. His first system was gloriously low-tech: a pair of Seeburg jukeboxes loaded with 45s to play the music, three reel-to-reel tape decks to fire the commercials and station IDs, and an electromechanical switcher to run the sequence. It was crude, but it solved a real problem. The graveyard shift, roughly midnight to dawn, was the least profitable, hardest-to-staff stretch of the day, and so it was the obvious first thing to hand to a machine. Which is why nearly all early automation was exactly what you'd guess: the overnight hours, and little else.

None of it would have been legal a few years earlier. The reason a station needed a warm body at the transmitter was the FCC's operator rule, which required a holder of a First Class Radiotelephone license (the "First Phone") on duty whenever the station was on. Automation became possible only as the Commission relaxed that rule. In 1953 it first allowed remote control of nondirectional stations of 10,000 watts or less, letting one engineer monitor and adjust the transmitter from the studio instead of the transmitter shack; Schafer built one of the first such remote-control units that year and installed it at KROW in Oakland. In 1957 the FCC extended remote control to all transmitters. Once the operator no longer had to be at the transmitter, the leap to no operator at all (to a machine running the late shift) was a short one.

YearWhat Changed
1953FCC permits remote control of nondirectional AM stations ≤10 kW: the transmitter can be run from the studio
1956KGEE, Bakersfield, becomes the first station to automate (overnight, Schafer system)
1957Remote control extended to all broadcast transmitters
1965AM-FM Non-Duplication Rule pushes ~200 big-market stations to automate their FM signal
1977Automatic Transmission System (ATS) accepted: the rig monitors and corrects itself, or shuts down
1981FCC stops issuing First & Second Class licenses; the "First Phone" era ends
1988Requirement to log transmitter readings is dropped
1995Full unattended operation permitted: no operator need watch the transmitter at all
2017Main Studio Rule repealed: a station can run entirely from a distant hub

Table 15.13-1

How the operator left the building195019601970198019902000201020201953Remote control (small stations)1956KGEE automates overnight1957Remote control for all1965FM rule: ~200stations automate1977ATS: rig corrects itself1981First Phone licenses end1988Transmitter logs dropped1995Unattended operation allowed2017Main studio rule repealedWho had to watch the transmitterengineer atthe transmitteran operator at the studio, by remote controlno one requiredWhat the machines ranovernightswhole FM formatssatellite formats, then voice trackingWhere the program came froma local main studioanywhereRemote control came in 1953 for nondirectional stations of 10 kW or less, and in 1957 for all.

Drawing 15.13-2

Automation did not stay in the overnight hours for long. In 1965 the FCC, trying to breathe life into the neglected FM band, barred big-market owners from simply simulcasting their AM programming on FM, and rather than hire whole new staffs to fill the freed-up hours, roughly two hundred stations automated them instead. The format of choice was "beautiful music," whose long, forgiving segues hid the seams a tape system left; tight, fast Top 40 was beyond the early gear. Soon syndicators like Bill Drake's Drake-Chenault were shipping entire pre-packaged formats to hundreds of stations, and by the 1980s satellite networks were feeding complete formats (all-news, overnight talk) from a single distant studio to stations across the country.

Meanwhile the operator rules kept falling away. The 1977 Automatic Transmission System standard let the equipment monitor and correct itself; in 1981 the FCC stopped issuing the old First and Second Class licenses; by 1988 even the duty to log the transmitter readings was gone; and in 1995 the Commission permitted fully unattended operation, with no one standing by to watch the transmitter at all. The "First Phone" that had once hung framed on the transmitter-room wall became a souvenir. The last barrier fell in 2017, when the FCC repealed the requirement for a local main studio, so today a station's entire broadcast day can originate hundreds of miles away, with a voice-tracked announcer who recorded the local breaks earlier that day and automation running the rest. The convenience that began in Bakersfield in 1956 to cover one lonely overnight shift had, sixty years on, quietly emptied the studio for good.

Sources: Museum of Broadcast Communications; Radio World ("Remote Controls Have a History All Their Own"; "The Demise of the First Phone"); Wikipedia (Schafer automation system; Voice-tracking); The Broadcast Archive (oldradio.com).

© 2026 Chris, N6JET. Free to read and share for non-commercial use with credit (Creative Commons BY-NC 4.0). Not for sale.

More in Rules, Operations and Economics

All AM radio stories by subject · AM radio interactive tools and simulators · AM Trivia Challenge quiz