Chapter 15, Section 2
Part of AM Radio Facts and Trivia: The AM Broadcast Band in the USA. Updated November 15, 2026.
The splatter era. Into the 1980s, an AM station’s audio bandwidth was limited by exactly nothing. Channels sit 10 kHz apart, but stations transmitted whatever high end their processing could generate, and to cut through on cheap radios, many piled on ferocious high-frequency pre-emphasis. The result: signals 30 kHz wide or more, smearing “monkey chatter” sideband splatter across their neighbors two and three channels away. Receiver makers defended their products the only way they could: by narrowing the IF passband until the interference went away, and most of the audio with it. Broadcasters boosted highs to punch through dull radios; radios got duller to reject the boosted highs. The band processed itself into the muffled sound everyone now associates with AM.
A truce at one table. The National Radio Systems Committee (jointly sponsored by the NAB and the Electronic Industries Association) put broadcasters and receiver manufacturers in the same room to negotiate a ceasefire. The deal, formally adopted January 10, 1987 as NRSC-1: stations would cap transmitted audio at a hard 10 kHz with a steep low-pass filter and apply one standardized pre-emphasis curve (a modified 75-microsecond characteristic), and in exchange receiver makers (finally knowing exactly what a transmitted AM signal looked like) would build wideband radios with the matching de-emphasis. Compliance was voluntary. NRSC-2 followed in June 1988, translating the audio cap into an RF emission mask.
Voluntary becomes law. The FCC liked the industry’s homework and adopted it: the First Report and Order in MM Docket 88-376, released April 27, 1989, wrote the NRSC emission limits into the rules as Section 73.44, one more entry for the century of paper covered in Dockets That Shaped the AM Band. Every AM engineer knows the legacy: the annual “NRSC measurement,” proving the station’s occupied bandwidth stays inside the mask, a yearly ritual since 1994.
The math. A 10 kHz audio ceiling doesn’t mean a 10 kHz signal: AM is double-sideband, so full NRSC audio occupies 20 kHz of RF, still overlapping the first-adjacent channels. The standard’s real victory was second-adjacent interference: with the wild pre-emphasis tamed and everything above 10 kHz gone, the splatter that once reached two and three channels out vanished. First-adjacent overlap was left to distance separation, as it always had been.
Drawing 15.2-1
The half that never happened. Broadcasters kept their side of the bargain; every US AM transmitter has been NRSC-clean for over three decades. The wideband receivers never came. Manufacturers kept building narrow radios; measurements of modern receivers found the median response down roughly 31 dB at 10 kHz: the transmitted top octave simply discarded at the radio. AM’s muffled reputation persists not because the signal is narrow, but because almost no radio ever built bothers to receive what stations have been faithfully transmitting since 1990. It was the same-era companion to AM Stereo: two engineering rescues of AM fidelity, one adopted and half-honored, the other strangled in a format war.
© 2026 Chris, N6JET. Free to read and share for non-commercial use with credit (Creative Commons BY-NC 4.0). Not for sale.
All AM radio stories by subject · AM radio interactive tools and simulators · AM Trivia Challenge quiz