Chapter 2, Section 7

Ground Radial Systems: The Invisible Half of the Antenna

Part of AM Radio Facts and Trivia: The AM Broadcast Band in the USA. Updated November 16, 2026.

The tower you can see is only half of an AM antenna. The other half is underground.

The Standard. A properly engineered AM ground system consists of 120 copper radials, each a quarter wavelength long, buried just below the surface and radiating outward from the tower base like spokes of a wheel. At 540 kHz (the bottom of the AM band), a quarter wavelength is about 456 feet; each radial wire stretches nearly the length of one and a half football fields. At 1600 kHz (the top of the band), it's about 154 feet. A full ground system for a low-frequency station can cover many acres of land.

How It Works. The buried radials act as an RF mirror, creating an electrical image of the tower below ground that effectively doubles the antenna's electrical length. A quarter-wave tower over a perfect ground plane behaves like a half-wave dipole, the most efficient basic antenna. Without the ground system, much of the transmitter's power is wasted heating the soil instead of radiating as signal. Poor ground means poor signal, regardless of how tall the tower is or how much power the transmitter puts out.

Why It Matters. This is why mountaintop AM stations perform so poorly (you can't bury copper in granite), why stations near salt water perform so well (salt water conductivity is nearly perfect), and why AM transmitter sites need so much flat land. It's not just the tower footprint; it's the acres of buried copper surrounding it. When a tower site is sold to a developer, ripping out the ground radials is part of the demolition. Once they're gone, they're gone.

THE GROUND RADIAL SYSTEM: THE INVISIBLE HALF OF THE ANTENNA PLAN VIEW (from above) ATU each radial ≈ λ/4 (246 ft @ 1000 kHz) 120 buried copper radials: one every 3° (36 drawn here) copper ground screen under the tower · green strap bonds it all to the ATU CUTAWAY (why it's there) tower (the visible half) radial, plowed in 6-12 inches RF return currents flow home through the soil: the copper catches them before the dirt wastes them THE STANDARD, BY THE NUMBERS • 120 radials × λ/4: the FCC benchmark since the famous Brown, Lewis & Epstein study (1937) • At 1000 kHz: 120 × 246 ft ≈ 5.6 miles of copper • Bonded to a screen at the base and the ATU ground • Skimp on radials and the soil eats your kilowatts

Half the antenna is underground. A vertical monopole only works against a return path: for every ampere flowing up the tower, an ampere flows home through the ground beneath the coverage area, converging on the base. Plain dirt is a terrible conductor, and current fighting through it turns transmitter power into warm soil. The cure has been settled since Brown, Lewis & Epstein's landmark 1937 measurements: bury 120 copper radials, each a quarter-wave long, one every 3 degrees, and the returning currents ride low-loss copper for their final journey instead of lossy earth. At 1000 kHz that's roughly 5.6 miles of wire plowed in a few inches deep, plus a ground screen or mesh under the tower where current density is fiercest, all brazed to a perimeter of straps that tie to the ATU's ground side. It's the least photogenic part of an AM station and one of the most expensive to do right, and because several miles of buried copper has scrap value, it's also what the thieves come for (see the building-grounding and WJLX sections).

Drawing 2.7-1

Chapter 2, Section 7, Part 2

When Copper Thieves Strike

An AM transmitter site is an unusually rich target: acres of buried copper, more copper coiled inside the tuning houses and the phasor, and all of it sitting at the end of a dirt road behind a chain-link fence, unattended, in the dark. As scrap-copper prices have climbed past $4 a pound, thieves have worked their way through the country's AM sites one by one, and because the copper is half the antenna, stealing it doesn't just cost money, it knocks the station off the air, sometimes for months, sometimes for good.

What they take, and in what order

The buried radials are the least of it. They're thin, dirty, oxidized wire spread over a quarter-wave in every direction; digging up 120 of them is a lot of work for scrap that pays poorly. The real prizes are clustered at and around the tower base and inside the buildings:

The ground screen, ring, and strap at the base, solid copper mesh and heavy bar where all the radials tie together, are the densest copper in the field and the easiest to find. Better still, from a thief's point of view, are the antenna tuning units in the doghouse at each tower base and the phasor cabinet in the transmitter building: big coils wound from copper tubing and strap, bus bars, and the copper-jacketed feed line. That's clean, heavy, high-grade copper, above ground, behind nothing more than a padlock. When thieves gutted WGSF in Memphis in 2025, they didn't stop at the ground system, about 85% of the station's phasor was gone, all three tuning-unit doghouses were roughly half destroyed, and the coax was sliced from the transmitter. The radials are the appetizer; the ATUs and phasor are the meal.

What it does to the signal

Pull the copper and the tower stops being an efficient antenna. The return current is forced through raw soil instead of a low-loss copper plane, so most of the transmitter's power ends up heating dirt rather than radiating. Coverage collapses. The antenna's base impedance shifts as the ground resistance climbs, the tuning no longer matches, reflected power spikes, and the transmitter often faults itself off to protect its final amplifier. For a directional station it's worse: the licensed pattern depends on a precise current-and-phase balance referenced to an intact ground system under every tower, so uneven damage bends the pattern out of tolerance, and the station is legally barred from radiating it until the whole system is rebuilt and re-measured.

Doesn't the antenna monitor stop it?

Not really. The antenna monitor is a measurement instrument: it reads the towers' current ratios and phases and can raise an alarm, but it is not a kill switch. Under 47 CFR §73.62 a directional station that drifts out of tolerance isn't required to drop instantly: minor deviations allow 24 hours to correct (logged), and only when a limit is exceeded must the licensee “terminate operation within three hours or reduce power.” That's a compliance clock, not a security system. The alarm goes to a remote operator or a contract engineer's phone at 2 a.m.; by the time anyone drives out, the copper is long gone. And there's a cruel twist: if the damage shifts the impedance enough to trip the transmitter off, the site goes dead and silent, which removes the RF hazard and lets the thieves work in peace.

The danger to the thieves

These raids happen at night, which for many of these stations is exactly when they're running, often a directional pattern at full licensed power. A series-fed tower base sits at hundreds to thousands of RF volts, and every radial and strap is carrying RF current. Cutting or lifting energized copper next to a live tower means deep RF burns (penetrating, slow-healing, nothing like an ordinary shock), along with RF shock and violent arcing the instant a blade parts a current-carrying conductor. A directional site has several hot towers, not one, and simply standing in that near field exceeds RF-exposure limits. It is a genuinely hazardous place to be swinging a shovel in the dark.

The danger inside the doghouse and the transmitter building

The tuning-unit doghouse at each tower base and the transmitter building hold the cleanest, heaviest copper on the site. They also hold the worst hazards. A thief who pries open one of these cabinets is reaching into equipment that engineers only touch after a strict safety routine.

Engineers spend whole careers learning to work around this equipment safely. A thief working in the dark with bolt cutters skips every one of those steps.

Sources for this part: Kevin McNamara, “Safety First,” Radio World (2004); Barry Mishkind, “Personal Safety Is Not an Accident,” The Broadcasters’ Desktop Resource (2019); LBA Technology, Application Note 20 (tuning-unit interlocks, static drain choke, arc gap, lighting choke); The Broadcast Bridge, “A Practical Guide to RF in Broadcast”; EngineeringRadio.us, “Material Safety at Transmitter Sites” (2022); Radio World on PCBs in older transmitters; Broadcast Electronics FM-5T and GE Mastr II manuals (beryllium oxide warnings). How many sources each point rests on: the transmitter’s stored charge and untrustworthy interlocks, three; remote control and backfeed, one (Mishkind); PCBs, two; beryllium oxide, two; the tuning-cabinet details (door interlocks, static drain choke, arc gap, lighting choke), one (the LBA note).

The math that makes no sense

A full ground system is hundreds of pounds of copper, but buried, dirty wire is discounted hard at the scrap yard, and a crew only lifts a fraction of it in a night. So the payoff is startlingly small against the wreckage left behind: reporting on these thefts found thieves walking away with “a few hundred dollars” of metal while inflicting tens of thousands in damage and taking small stations off the air for months.

~$500,000 in damage, for about $100 of copper. Hugo, Oklahoma, January 2024: thieves felled a 500-foot broadcast tower to strip its copper. The scrap was worth roughly $100; the destruction ran near half a million dollars, and it led to prison time.

It keeps happening: a sampling

StationWhereWhenWhat happened
WGSF 1030Memphis, TNMay 2025Phasor ~85% stripped, all three tuning-unit doghouses ~50% destroyed, coax cut. ~$170,000 damage; off air, ran an FM translator.
WGVM 1260Greenville, MSNov 2025A vehicle yanked the transmission lines out of the building; AM tuning unit, iso-coupler and transmitters destroyed: “massive and total damage.” Took an AM and two FM signals down.
KFTI 1070Wichita, KSJan 2026Tower-array ground system stripped and the transmitter damaged; knocked off the air, left streaming only.
WJLX 1240Jasper, ALFeb 2024The entire 200-foot tower and the transmitter were hauled away: guy wires cut, the whole structure taken. The owner called it “a professional hit.”
WZRKLake Geneva, WI2012Ground radials dug up from outside the fence line: the site's second theft; the owner asked the FCC for months of silence to rebuild and add security.
WPPA / WAVTPottsville, PA2024Ground-system copper taken; thieves netted “a few hundred dollars” against tens of thousands in repairs: a case in the reporting on small stations going silent.
KBZZ 1270Reno, NVJun 2023The transmitter site’s AC wiring and its air handling system were stripped and stolen. The AM and its Carson City FM translator went silent under an FCC silent authority while the site was repaired.
WPPAPottsville, PADec 2021Thieves cut through the fences around all five towers and took copper tubing, straps and ground screen, about $100,000 worth. It was the third theft at the site since 2016. The owner then relicensed the station on one non-directional tower instead of five.
KBTM 1230Jonesboro, ARSep 2018Thieves used a truck to rip copper wiring out of the ground and the building, also knocking FM sister KIYS off the air. About $80,000 in damage, including the transmitter building and backup generator.
KMBI 1330Spokane, WANov 2013Thieves pulled the transmission wires off the tower and knocked the station off the air. The FM sister station was not affected.
1300 kHz (call letters not given)Cleveland, OHFeb 2012A thief came back three nights running for the ground strap and counterpoise of this 5 kW Radio One station. The station’s audio logger showed the signal shrinking night by night, and the FBI used it in court. The thief got 11 years in federal prison.
KLZ 560 and KLVZDenver area, COSep to Oct 2008KLZ lost tower-base strap and radial wire, and old rigid transmission line from its storage barn. At the KLVZ daytime site north of Brighton, nearly the entire ground system was taken.
A 50 kW AM (call letters not given)Birmingham, ALFeb 2008Ground screens, strap and radial wire damaged or taken, costing more than the copper was worth. A nearby tower farm was hit again by the same thief after his arrest.
KPSI and KNWQPalm Springs area, CAby early 2007KPSI lost all the copper at its four-tower transmitter plant. Soon after, KNWQ had part of its ground system stripped.

Table 2.7-2

Sources: individual incidents linked in the table above (Radio World, Inside Radio, RadioInsight, Columbia Journalism Review). Ground-system role and the copper screen: Radio World, AM Ground Systems and Ground Systems. Out-of-tolerance rules: FCC 47 CFR §73.62. The Hugo, Oklahoma tower case: Radio Ink / Wireless Estimator (Jan 2024).

Sources for the eight rows added November 16, 2026 (KBZZ through KPSI), with how many sources each rests on: KBZZ, one (an FCC filing quoted on a radio forum); WPPA 2021, two (U.S. Press Freedom Tracker, Coal Region Canary); KBTM, one (Associated Press via Insurance Journal), with the AM frequency from the station’s Wikipedia entry; KMBI, two (Radio World, Wikipedia); Cleveland 1300, one (a Radio World letter from the station’s engineer, 2025); KLZ, KLVZ and Birmingham, one (Cris Alexander, Radio World, 2009); KPSI and KNWQ, one (Radio World, 2007). Station names and dates are as those sources give them.

More AM Radio Stories

AM Radio Facts and Trivia, the main page, with hundreds more records, oddities and firsts. Test yourself with the AM Trivia Challenge.

More in The Tower and Antenna

All AM radio stories by subject · AM radio interactive tools and simulators · AM Trivia Challenge quiz

© 2026 Chris, N6JET. Free to read and share for non-commercial use with credit (Creative Commons BY-NC 4.0). Not for sale.