Appendix B, Section 7

Reading the Coverage Map: Field-Strength Contours Explained

Part of AM Radio Facts and Trivia: The AM Broadcast Band in the USA. Updated November 15, 2026.

The whole station-class system is built on a measurement most listeners never hear named: signal strength in millivolts per meter (mV/m), drawn as contour lines on a map. A few of these contours do all the legal work.

The 2 mV/m contour is the traditional "city-grade" line: the strong-signal core where a station is expected to blanket an urban area cleanly. The 0.5 mV/m contour marks primary/rural service for many classes: solid daytime listening out in the country. Much fainter lines (down around 0.025 mV/m) describe secondary and skywave service. And at night the controlling number is the nighttime interference-free (NIF) contour, not a fixed value, but wherever the station's own signal still rises above the combined interference piling in from every co-channel station after dark.

This is why two stations with identical 50 kW transmitters can have utterly different "real" coverage: the one over high-conductivity soil pushes its 0.5 mV/m line far into the countryside, while the one on poor ground sees the same contour collapse toward the transmitter. It's also why a clear-channel Class A station is so jealously protected: its enormous nighttime contour is precisely what the directional arrays of dozens of other stations are shaped to avoid stepping on.

Sources: FCC 47 CFR 73.182 (contours and classes) · NAB Engineering Handbook.

READING THE CONTOURS: AN IMAGINARY 5 kW NON-DIRECTIONAL STATION mountains, dry rocky soil (low conductivity) river valley: rich, damp, conductive soil city of license 0.1 0.5 2 5 25 TX a measurement radial: field checked point by point N WHAT EACH RING MEANS 25 mV/m blowtorch local signal: overrides noise anywhere 5 mV/m city grade: must cover the city of license by rule 2 mV/m solid daytime listening, car radios happy 0.5 mV/m typical protected contour: other stations must not interfere inside this line 0.1 mV/m fringe: quiet rural receivers and DXers only WHY THE BLOBS? Same power every direction: but groundwave rides the dirt. East: damp river-valley soil carries the signal far (bulge). West: rocky mountain soil eats it (pinch). A directional station's contours add the pattern's shape on top.

The map is the license made visible. A field-strength contour connects every point where the signal has fallen to the same level, and the rings tell the station's whole regulatory story at a glance: the 5 mV/m line must blanket the city of license, the 0.5 mV/m line is the fence other stations must stay out of, and the 0.1 mV/m fringe is where the signal fades into the DXer's territory. The rings are never circles, even from a non-directional tower, because groundwave range is set by the dirt it crosses: the same 5 kW that rides damp river-valley soil for an extra county gives up early against dry mountain rock (that's the M3 conductivity story from the propagation section). Engineers prove the lines the old-fashioned way: drive out along radials from the tower, measure the field at point after point, and plot where each value falls. Add a directional pattern and the blobs stretch into the kidney and peanut shapes shown in Directional Arrays: How They Work.

Drawing B.7-1

© 2026 Chris, N6JET. Free to read and share for non-commercial use with credit (Creative Commons BY-NC 4.0). Not for sale.

More in Reference

All AM radio stories by subject · AM radio interactive tools and simulators · AM Trivia Challenge quiz