How to Connect to N6JET Reflectors
All five N6JET reflectors side by side, with the settings a hotspot needs for each mode. Find your mode, read across, and use the column for the reflector you want. A grey No means that reflector does not offer it.
At a glance
| XLXJET | URFJET | M17JET | C4FMJET | VEXJET | |
|---|---|---|---|---|---|
| What it is | xlxd multimode reflector | urfd multimode reflector | mrefd M17 reflector | C4FM DG-ID gateway | Vexillum multi-mode reflector |
| Modes | D-STARDMRYSF | DMRYSFNXDN | M17 | YSF | D-STARDMRM17YSFNXDNP25 |
| Address | 5.161.215.224 | 5.161.18.189 | 5.161.19.207 | 5.161.18.72 | vex.n6jet.com |
| Do modes hear each other? | Yes, every module is transcoded | Yes, DMR, YSF and NXDN share one codec | M17 only, with AllStar and EchoLink bridges on some modules | YSF only | Module A: yes, DMR, TGIF, YSF, NXDN, P25, M17 and D-STAR are joined. Module B (General Use): DMR, M17 and D-STAR are joined. Modules C to Z: each mode is separate. Module Z is the echo test |
| Echo test (parrot) | Module Z | No | No | DG-ID 99 | Module Z (DMR, M17 and D-STAR) |
| Dashboard | n6jet.com/xlxd | n6jet.com/urfjet | n6jet.com/mrefd | n6jet.com/ysf | DVRef listing |
| More | XLXJET Purpose | URFJET Purpose | M17-JET Purpose | C4FM-JET Purpose | About Vexillum |
DMR DMR
None of these are in the standard DMR master lists. Add them once as a custom entry: type the address in on an openSPOT, or add a custom DMR master in Pi-Star or WPSD.
| XLXJET | URFJET | M17JET | C4FMJET | VEXJET | |
|---|---|---|---|---|---|
| Address | 5.161.215.224 | 5.161.18.189 | No | No | vex.n6jet.com |
| Port | 62030 (DMR+ 8880) | 62030 (DMR+ 8880) | No | No | 62031 |
| Password | Hotspot default | Hotspot default | No | No | passw0rd (with a zero) |
| Pick a module | TG 4001 to 4026 = A to Z | TG 4001 to 4026 = A to Z | No | No | TG 64001 to 64026 = A to ZA = Silicon Valley Multimode via VEX (default) Z = echo test, TG 64026 |
| Talk on | The module TG | The module TG | No | No | TG 7, timeslot 2 |
| Unlink | TG 4000 | TG 4000 | No | No | TG 64000 |
| Status | No | No | No | No | TG 65000 |
YSF YSF (C4FM Fusion)
All three are registered YSF reflectors, so they appear in the YSF list your hotspot downloads. Set your radio to DN mode, then choose the room with the DG-ID.
| XLXJET | URFJET | M17JET | C4FMJET | VEXJET | |
|---|---|---|---|---|---|
| Find it as | YSF 95112 US-XLXJET | YSF 95111 US URFJET | No | YSF 95110 US-C4FM-JET | YSF 95114 US-VEXJET (new, may not be in your list yet) |
| Manual entry | 5.161.215.224 port 42000 | 5.161.18.189 port 42000 | No | 5.161.18.72 port 42002 | vex.n6jet.com port 42000 |
| Pick a room | DG-ID 10 to 35 = module A to Z | DG-ID 10 to 35 = module A to Z | No | DG-ID 01 to 99 = 99 rooms; 00 = lobby | One room, no DG-ID needed |
| Echo test | DG-ID 35 (module Z) | No | No | DG-ID 99 | No |
M17 M17
Add the reflector to your hotspot's M17 hosts as a custom entry if it is not already in your list, then link to the module letter.
| XLXJET | URFJET | M17JET | C4FMJET | VEXJET | |
|---|---|---|---|---|---|
| Reflector name | No | No | M17-JET | No | VEX-JET (custom entry) |
| Address | No | No | 5.161.19.207 | No | vex.n6jet.com |
| Port | No | No | 17001 | No | 17002 |
| Modules | No | No | A to L, Q, S (see module map) | No | A to Z Z = echo test |
D-STAR D-STAR
XLXJET and VEXJET take D-STAR. On XLXJET, link to the module letter the same as any XLX reflector; every module is transcoded, so D-STAR users share every module with DMR and YSF users. VEXJET takes DExtra only, so add it as a custom DExtra (XRF) host. On VEXJET, modules A and B are joined to the other modes.
| XLXJET | URFJET | M17JET | C4FMJET | VEXJET | |
|---|---|---|---|---|---|
| Address | 5.161.215.224 | No | No | No | vex.n6jet.com |
| Ports | DPlus 20001 · DExtra 30001 · DCS 30051 | No | No | No | DExtra 30001 (no DPlus or DCS) |
| Pick a module | Module letter A to Z | No | No | No | Module letter A to Z Z = echo test |
NXDN NXDN
URFJET and VEXJET take NXDN. Both are registered, so they appear in the NXDN list your hotspot downloads (VEXJET 9512 is new and may take a day). On URFJET, set the same RAN on your radio and your hotspot.
| XLXJET | URFJET | M17JET | C4FMJET | VEXJET | |
|---|---|---|---|---|---|
| Find it as | No | NXDN 9511 | No | No | NXDN 9512 |
| Manual entry | No | 5.161.18.189 port 41400 | No | No | vex.n6jet.com port 41400 |
| Pick a module | No | RAN 1 to 26 = A to Z | No | No | One room, no RAN needed |
P25 P25
VEXJET takes P25 on 9512, joined to module A, Silicon Valley Multimode. The number 9512 used to belong to the separate P25-JET reflector, which has been retired, so 9512 is already in the P25 list your hotspot downloads and now leads to VEXJET.
| XLXJET | URFJET | M17JET | C4FMJET | VEXJET | |
|---|---|---|---|---|---|
| Find it as | No | No | No | No | P25 9512 |
| Manual entry | No | No | No | No | 5.161.18.189 port 41100 |
| Pick a module | No | No | No | No | One room (module A). Set your radio to TG 9512 |
Pi-Star or WPSD, in short
- Open your hotspot's dashboard and go to Configuration.
- Turn on the mode you want and Apply.
- For YSF, NXDN and P25, pick the reflector from the drop-down list.
- For DMR and M17, add the reflector as a custom entry with the address and port above, then select it.
- Apply changes and watch the dashboard for the link. Then pick your module or room from the radio.
Updated 7 November 2026.